Please select a Shopping List

Root Beer Stairnose Molding by Shaw

$96.09
In stock
SKU
SWS07_27522
Root Beer Stairnose Molding by Shaw by Shaw Industries; Trim, end caps, and molding (moulding) are essential flooring elements that help cover the expansion gaps left at the edges of your room and to transition between rooms. They can even create a smooth transition from one flooring type to another. SWS07_27522

Root Beer Stairnose Molding by Shaw measures 2.33 X 78.00 and is also available as Overlap Reducers, Stair Caps, Baby Thresholds and T-Molds. You can download printable measurement specs here. These moldings (moulding), end caps, and trim cover unprotected and unfinished edges of your floor and help with transitions involving doors, stairs, fireplaces, and even room to room.

Use T-molding and overlap reducers when transitioning between two distinct floors. Specifically, use T-molding when the floors are the same height and overlap reducers when the rooms vary slightly with height. Stair caps and flush stair noses both absorb the impact put on stairs. Quarter-round molding can be used along a perimeter of a room to seamlessly finish your floor's look. Baby thresholds (end caps) are often used against sliding doors, fireplaces and in other areas where hardwoods meet carpet.

There is a flat rate per carton for shipping trim; up to 5 "sticks" can be placed in one box for shipping. This product requires 5-7 business days from the time of order to be delivered. Expedited delivery is available, but you need to call us to confirm availability arrange for the shipment. If you need to have a physical sample, we may be able to help. Simply give us a call or send us a message and we will send you a profile cut priority mail.

T-Mold and Overlap Reducer (End Cap) Installation Instructions

  1. Measure twice and cut trim to fit.
  2. Affix track to floor using adhesive, screws, or nails.
  3. Insert molding into track. Tap down with rubber mallet.

Stair Cap Installation Instructions

  1. Measure twice and cut trim to fit.
  2. Affix track to stair edge using adhesive.
  3. Follow adhesive manufacturer's instructions completely.

Flush Stair Nose Installation Instructions

  1. Measure twice and cut nosing to fit.
  2. Dry fit the molding to ensure it is sized appropriately.
  3. Scuff/Abrade the underside of the nosing with coarse sandpaper.
  4. Clean/Wipe the underside of the nosing with denatured alcohol and allow to dry.
  5. Prep the substrate, remove any surface contaminants (and/or) moisture.
  6. Apply premium construction adhesive liberally in an "S" pattern (or) use molding tape to secure the nosing.
  7. Slowly insert the nosing, ensuring a flush fit to the stair edge and butt tightly against flooring.
  8. Apply direct pressure and secure with weights/sandbags (or) pre-drill and insert finish nails (depending on local building code requirements).
  9. Fill nail holes with a colored sealant.

Quarter Round Installation Instructions

  1. Measure twice and cut trim to fit.
  2. Affix molding to floor using screws or nails.

Baby Threshold (End Cap) Installation Instructions

  1. Measure twice and cut trim to fit.
  2. Affix molding to floor using adhesive.
  3. Follow adhesive manufacturer's instructions completely.

*Examples of trim shapes and some sizes. Please note, these sizes are not necessarily specific to this particular product.

COREtec®
COREtec®
COREtec®
COREtec®
Quarter
COREtec®

Product Care

Residential Maintenance Guidelines

Newly Installed Floor Care
  • Always use plywood or other boards when moving heavy objects across the floor.
  • Sweep, dust mop or vacuum the floor to remove all loose dirt and grit.
  • Lightly damp mop with well wrung mop.
Initial and Routine Maintenance (Daily or as needed)
  • Sweep, dust mop or vacuum the floor to remove all loose dirt and grit. Do not use treated dust mops.
  • Clean the floor using a properly diluted Neutral pH cleaner in cool water or ready to use spray cleaner that will not leave a residue such as Bona Professional Series Stone, Tile, and Laminate Cleaner in a pre-mixed spray bottle. Follow label instructions.
More Information
Country of Manufacture United States
Manufacturer Shaw Industries
Product Collection Stairnose Molding by Shaw
Weight 1.0000
Dimensions 2.33 X 78.00
Unit of Measure Per Piece
Copyright © 2022 Products Direct. All rights reserved.